Concrete Finisher

at Jardeg-Construction
Location Brandon, Canada
Date Posted August 4, 2022
Category Construction
Job Type Not Specified


Position: Concrete Finisher

Project Location: Brandon, MB

Shift: 10 hours

Schedule: 5/2

Rate: $26.00-$35.00

Accommodations: Not Available

Travel Details: Not Available

GC: Graham

Allied Partner: Banff Countructors

Reference Number: 16095

Position Summary:

Possess the full range of knowledge to perform skilled concrete finishing techniques, primarily on flat surface concrete projects including bridge decks, sidewalks, and curbs, using a variety of hand and power tools.

Duties & Responsibilities:

Place and finish concrete floors, driveways, sidewalks, curbs, bridge decks and other concrete structures.
Apply architectural, exposed, patterned or stamped, broomed and smooth finishes on concrete surfaces.
Repair, waterproof and restore concrete surfaces.
Uses dry pack grouting and epoxy materials, and understand how to cure concrete properly.
Level and smooth the surface, round the edges, and make joints or grooves to help control cracking on the surface.
Perform hand troweling for hard to reach spots in corners, edges, and around pipes.
Set the forms that hold concrete to the desired pitch and depth, and alignment.
Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.
Mold expansion joints and edges, using edging tools, jointers, and straightedge.
Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.
Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.
Produce rough concrete surface, using broom.
Operate power vibrator to compact concrete.
Mix concrete, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill.
Wet concrete surface, and rub with stone to smooth surface and obtain specified finish.
Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.
Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.
Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.
Build wooden molds, and clamp molds around area to be repaired, using hand tools.
Fabricate concrete beams, columns, and panels.
Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete and/or pattern or stamp the surface to provide a decorative finish.
Polish surface, using polishing or surfacing machine.


Experience: Minimum 5 years of related work experience.


With a significant presence in the construction, industrial maintenance, and turnaround sectors, Jardeg is the largest recruiter of skilled trades in Canada. In 2022 alone, we ll be supporting over 10 million manhours of work and a peak headcount over 10,000.

If you re a tradesperson working in Canada, our position across commercial, infrastructure, and industrial construction, plus maintenance and turnarounds means we have more than just a job for you. We have a lifetime of work.

Drop files here browse files ...